Secolink Universal communicator GSV5 Alarm GSM/GPRS Kit

KSh20,000.00 Excl. Tax

‘- compatibil BUS Paradox SP6xxx, SP7xxx, MG5xxx, EVOxxx, 7xxULT, 17xx, NE9x, E5x *compatibil keybus DSC PC5xx, PC15xx, PC14xx, PC16xx, PC18xx protocol E2, Fibro si Kodinis compatibil cu dispecerate Instant
SMS si apel catre end-user CID prin GPRS
– 2 x PGM, USB
– alimentare din centrala: 9-14V, consum max 2 PGM active 365mA
– cutie de plastic, dimensiuni: 120×64
– temperatura functionare -10 – +50grade


Secolink Universal communicator GSV5 Alarm GSM/GPRS Kit

Secolink Universal communicator GSV5 Alarm GSM/GPRS Kit is designed to be used in objects along with other manufacturers intruder alarms systems. It gives options to report to the receiver of CMS, to control and monitor the system with the mobile app SECOLINK PRO (set on TCP/IP or SMS communication), with simple SMS messages or with phone call.

DescriptionVersatile GSM/GPRS communicator
Product typeAlarm system module
In-built wired zones on board6
On-Board (open collector type) PGM2
Reporting to CMS formatCID by GPRS
Reporting protocols for CMSE2 (Enigma), FIBRO (Sur-gard), CSV (Patriot), SIA
Compatibility with control panels via KEYBUSPC5xx, PC14xx, PC15xx, PC16xx, PC18xx
Compatibility with control panels via SERIALSP4xxx, SP6xxx, SP7xxx, EVOxxx
Compatible with SG-SYSTEM II , III IP cardYes
Alarm message for end userSECOLINK PRO app, GSM call, SMS
Available language for voice guideEnglish (available other languages)
Available language for SMSEnglish (available other languages)
DTMF converting from PSTN to GPRSYes (one way)
Available in plastic enclosureYes
Maximum current into -PGM1-0.05 A
Maximum current into -PGM2-0.05 A
Power supply from an independent source of power:
Maximum battery charging current+0.035 A
Rated voltage of power supply (AC)~20 V
Minimum AC voltage~16 V
Maximum AC voltage

(Note: higher than ~22 V voltage can damage control panel)

~22 V
Maximum current of slow blowing fuse used in primary AC250 mA
Maximum AC power consumption15 mA
Power supply from an Control Panel source of power:
Power supply (DC)9 – 14 V
Current consumption50 mA
Current consumption with all PGM’s260 mA
Overall dimensions W x H in mm120 x 64
Environmental complianceROHS
Operating temperatureFrom -10oC to +50oC
Interface for communicator settings programmingUSB
Interface for communicator firmware updatingUSB

Burglar Alarm Products; GSM, LED, LCD & Wireless Control Panels

Add to cart